XUP-VV8

Block Diagram

Board Specifications

FPGA

• Virtex UltraScale+
• VU9P or VU13P in D2104 package
• Core speed grade – 2
• Contact BittWare for other FPGA options

On-board Flash

• Flash memory for booting FPGA

External memory

• 4 DIMM sites, each supporting:
  • Up to 128 GBytes DDR4 x72 with ECC
  • Up to 576 Mbits dual QDR-II+ x18 (2 independent 288 Mbit banks)

Host interface

• x16 Gen3 interface direct to FPGA

USB ports

• Micro USB: access to BMC, FPGA JTAG, and FPGA UART

Timestamp

• 1 PPS input and 10MHz clock input

OCuLink

• 2 OCuLink on rear edge, each connected to FPGA via 4x GTY transceivers

QSFP cages

• 4 QSFP-DD cages on front panel
• Each supports 2x 100GbE, 2x 40GbE, 8x 25GbE, or 8x 10GbE
• Jitter cleaner for network recovered clocking

Board Management Controller

• Voltage, current, temperature monitoring
• Power sequencing and reset
• Field upgrades
• FPGA configuration and control
• Clock configuration
• I2C bus access
• USB 2.0
• Voltage overrides

Cooling

• Standard: dual-width passive heatsink
• Optional: single-width passive heatsink*
• Optional: dual-width active heatsink
• Optional: dual-width liquid cooling

Electrical

• On-board power derived from 12V PCIe slot & two AUX connectors (8-pin)
• Power dissipation is application dependent

Environmental

• Operating temperature 5°C to 35°C

Form factor

• 3/4-length, standard-height PCIe dual-width board
• Single-width option*
• 10 x 4.37 inches (254 x 111.15 mm)

Development Tools

System development

• BittWorks II Toolkit – host, command, and debug tools for BittWare hardware

FPGA development

• FPGA Examples – example Vivado projects, available with the BittWorks II Toolkit
• Xilinx Tools – Vivado® Design Suite