Jump to a Server
Why TeraBox?
BittWare’s Terabox™ range of certified server platforms feature the latest FPGA accelerators enabling customers to develop and deploy quicker with reduced risk and cost.
Development
Getting started has never been easier!
| Start your application proof-of-concept without having to dedicate additional valuable resources for setup. |
| A one-stop shop for all your development needs |
| Terabox servers are populated with your choice of BittWare FPGA accelerator(s) |
| Operating System and FPGA development tools are pre-installed |
| BittWare FPGA hardware device drivers, diagnostic utilities and toolkits are ready to run |
| A single, comprehensive hardware warranty covers both the server chassis and FPGA accelerator card(s) |
| Technical support and design services available on request |
Deployment
Transition from the lab to the market with minimum cost and risk
| Terabox servers are deployment-ready for mission-critical applications |
| BittWare's FPGA BMC allows Managers to remotely program/monitor/manage FPGA real-estate |
| Let BittWare take care of custom branding and qualification testing |
| Servers configurable to include your host-based application, ready to run with click-through licensing |
| FPGA bitstream executables can be pre-loaded onto FLASH memory for auto-run at power up |
| As part of Molex, we can handle global supply chain, facilities, and logistics |
| Option to source Terabox servers via DELL EMC and HPE OEM programs |
| Customized service level agreements available on request |
TeraBox 1000S
1U FPGA Server
The TeraBox 1000S is for developers looking for a low-cost server for a single board that still provides front-panel access and good airflow over the board.
Learn more on the product page.
- Single Intel Xeon CPU
- Front panel access for up to (8) 100GbE Ports or (32) 10GbE/25GbE ports
- Supports any BittWare FPGA card with dedicated fans for cooling
Did you know...
BittWare’s integrated servers are delivered ready to go!
BittWare takes care of supply chain management, product integration, validation and thermal testing so that you don’t have to.
TeraBox 1100L
1U FPGA Server
Designed specifically for the XUP-P3R, the 1100L provides four front-panel QSFP28s plus twenty SFP+s that connect directly to the Xilinx VU9P FPGA.
Learn more on the product page.
- Intel CPU with loop heat pipe cooling
- Four QSFP28s for 4x 100GbE or 16x 10/25GbE plus 20x SFP+ for 10GbE
- Four removable drive bays for SATA or SAS flash storage
Did you know...
You don’t have to install any software on your TeraBox.
BittWare will pre-install your operating system, FPGA development tools, BittWare tools, and FPGA device drivers. All you have to do is log in.
TeraBox 1400DN
1U FPGA Server
Based on the Dell EMC PowerEdge C4140, the TeraBox 1400DN packs four FPGA cards in a 1U chassis. It's the ideal solution for analytics, machine learning, and high-performance computing.
Learn more on the product page.
- Four standard height, double width, full length boards including front-panel network port access
- Supports latest Xeon Scalable processors
- Direct FPGA to CPU communication
- Front panel access for up to 32x 100GbE ports or 128x 10/25GbE ports
- Available with Dell service and warranty
Did you know...
A TeraBox warranty covers the whole system!
BittWare’s warranty covers not only the FPGA accelerator card(s) but also the entire server. If a component in your system fails, everything is covered.
TeraBox 1400B
1U FPGA Server
The ultimate in FPGA density! Four double-width Xilinx- or Intel-FPGA based BittWare cards in a 1U chassis, complete with front-panel network access and dual Xeon Scalable CPUs gives the TeraBox 1400B double the density of a typical 4U/8-board server.
Learn more on the product page.
- Four standard height, double width, full length boards including front-panel network port access
- Custom designed chassis pulls airflow across FPGA cards first
- Supports latest Xeon Scalable processors
- Front panel access for up to 32x 100GbE ports or 128x 10/25GbE ports
- Dual Xeon CPUs dedicate 1 CPU for every 2 FPGA cards
Did you know...
We can get your system deployment ready for an end customer!
Imagine having a system shipped to your customer where all of the system testing has been done, software is installed and FPGA is pre-loaded with your bitstream.
TeraBox 2000D
2U FPGA Server
Based on the popular Dell EMC PowerEdge R740, we offer a range of double-width and low-profile cards in this server.
Learn more on the product page.
- Supports three double-width FPGA cards or up to seven low-profile cards
- Supports latest Xeon Scalable processors
- Up to 24x 100GbE Ports or 96x 10GbE/25GbE ports
- Backed by Dell support and warranty
Did you know...
We can put your company branding on the TeraBox.
Ask us about customizing the TeraBox with your logo or even a custom front panel.
TeraBox 4000S
4U FPGA Server
Meet our largest TeraBox. The TeraBox 4000S provides a mix of density, performance, and price. Up to eight double-width FPGA cards are connected to two Xeon Scalable CPUs (4 FPGAs per CPU), with rear-panel port access.
Learn more on the product page.
- Standard 8-board, 4U form factor chassis
- Up to 64x 100GbE Ports or 256x 10GbE/25GbE ports
- Balance of density, performance, and price
Did you know...
BittWare can certify your system.
If your overall TeraBox needs to be certified, BittWare can take care of it for you.
TeraBox X5000TT
5U FPGA Expansion Chassis
Are you seeking to maximize FPGAs connected to a single host? The TeraBox X5000TT connects eight FPGA cards to another server through a PCIe expansion cable. Connect multiple Expansion chassis to a single host for dozens of FPGA cards all under one operating system!
Download the datasheet to learn more.
- Serial expansion for FPGAs
- Up to (64) 100GbE Ports or (256) 10GbE/25GbE ports
- Single USB interface to all of the FPGA cards
- Perfect for applications benefitting from a single operating system instance
- Standalone version also available
Did you know...
You can remotely program, monitor, and manage your FPGA cards!
Access your card with our sophisticated FPGA Board Management Controller (BMC) or use our BMC library to integrate it into your existing monitoring software.
LDA e4
1U FPGA Server
Designed for the maximum front-panel SFP+ ports from the XUP-P3R, LDA’s e4 FPGA chassis gives up to 48 10GbE ports or a combination of 16x 25GbE and 32x 10 GbE.
Learn more on the product page.
- 48 front-panel dedicated SFP+s
- Crosspoint switch fabrics and other unique features
Did you know...
BittWare can handle global supply chain, facilities, and logistics.
BittWare is a part of the Molex group of companies, which gives us access to Molex's vast network of resources worldwide.
