At the extreme of FPGA server density, the TeraBox 1501B/1502B give the highest level of compute and network capability in a 1U chassis. The TeraBox 1501B and 1502B servers provide almost twice the density of the typical 4U server and the power of 4 of our largest Achronix Speedster7t, Altera Agilex, or AMD UltraScale+ FPGAs. These innovative products support PCIe Gen5 and feature an AMD EPYC or Intel Xeon processor in a standard rack depth chassis.
Hi, I’m Carlos with BittWare. I’m here to tell you about two ultra-high-density TeraBox servers.
Both these FPGA servers give you four double-width cards with front panel access and in a 1U chassis. Previously that kind of density had required a very deep chassis, but these TeraBox servers fit into a standard depth rack. As I mentioned these servers are all about density and front panel access to ports like the QSFPs.
Let’s remove the lid and look at the motherboard. You can see here we have four cards loaded.
Both AMD and Intel variants support Gen4 by 16 which is supported on a number of FPGA cards from BittWare, and gives you double the bandwidth to the host as compared to Gen3. You can see with single CPU motherboards we’re able to keep the depth of the chassis to 28 inches but still provide server grade processors and lots of host DDR4 channels.
For cooling the default configuration brings air from the front of the server out to the back, which provides the FPGAs with the coldest air. This can be reversible for customers that need that. In fact, the whole chassis can be reversed with the rack ears installed at the back of the server or at the front of the server.
For card support we’re targeting a wide range of our FPGA cards including our newest Gen4 capable designs.
On the 1401B you have a choice of AMD EPYC 7002 series processors with 8 banks of DDR4 and up to a terabyte of host memory.
For the 1402B we offer Intel Gen3 Xeon processors and a choice of configurations with eight banks of DDR4 and up to a terabyte of memory.
On the 1401B you also get a low-profile slot on the back of the server for additional networking. Over here is a power supply. Both variants have dual 1300-watt redundant power supplies. One of the key advantages of these TeraBox servers, beyond the high performance, is the convenience of getting a pre-configured server. We handle all the testing, integration and validation of these servers and the cards. We also provide a three-year warranty on the server and the cards.
So that’s a quick look at the TeraBox 1401B and 1402B servers. You’re getting:
All that in a standard depth 1U chassis.
To learn more or get a quote visit BittWare.com.
Thanks for watching.
TeraBox 1501B | TeraBox 1502B | |
Chassis | 1U depth 28.25” (71.75 cm) | |
Processor | (1) AMD EPYC 9004 Series Processor | (1) Intel 4th Gen Xeon Processor |
Ethernet | 2 RJ45 (10GbE) by Intel® X550-AT2 | 2x RJ45 (10GbE) by Broadcom BCM57416, 2x RJ45 (1GbE) by Intel® i210 |
Memory | Up to 8 DDR5 DIMM slots | |
Storage | Up to 2x M.2 (PCIe5 x4) | Up to 2x M.2 (PCIe3 x4) |
Slots | 4x front panel PCIe Gen 5 x16 | |
Power Supply | 1+1 AC 1300W, 110/220V | |
The TeraBox 1501B/1502B support up to four dual-width BittWare PCIe FPGA cards. Choose from a variety of cards based on Achronix, Altera, and AMD FPGAs. System specs will vary greatly, depending on the FPGA card you select. For example, with four BittWare Intel Agilex PCIe cards, which support up to 3x 400GbE interfaces each, the chassis can support as many as 12x 400GbE interfaces. With four Agilex cards using breakout cables, each chassis supports 48x 100GbE.
The TeraBox 1500B family servers are exclusive to BittWare and are the ideal platform to unleash the energy-efficient acceleration of BittWare’s FPGA cards. This FPGA-optimized 1U server delivers unrivaled performance density and value for a range of compute-intensive applications, including machine learning.
The server is assembled in the USA, is TAA compliant, and offers a 3-year warranty.
Choosing a TeraBox FPGA server means knowing you are getting a pre-configured and tested solution. This includes setup and installation of your FPGA cards and associated hardware, your choice of operating system, and development tools. Your TeraBox arrives ready for use—giving your team more time for development and deployment.
A TeraBox warranty covers the whole system!
BittWare’s 3-year TeraBox warranty covers not only the FPGA accelerator cards but also the entire server. If a component in your system fails, everything is covered.
Standard
*Option for 2000W fixed power supply
v0
Contact BittWare if this configuration is not exactly what you are looking for. BittWare can work with you to come up with a server configuration that suits your exact needs.
Standard
*Option for 2000W fixed power supply
v0
Contact BittWare if this configuration is not exactly what you are looking for. BittWare can work with you to come up with a server configuration that suits your exact needs.
Our technical sales team is ready to provide availability and configuration information, or answer your technical questions.
White Paper Introduction to BittWare’s Loopback App Note and Example Overview BittWare’s Loopback example demonstrates several things: How to fully use the Xilinx CMAC in
Go Back to IP & Solutions RDMA Low-Latency RoCE v2 at 100Gbps The GROVF RDMA IP core and host drivers provide RDMA over Converged Ethernet
The New IA-220-U2 with PCIe Gen 4 FPGA Computational storage PROCESSOR (CSP) Gen 4 PCIe NVMe Eideticom NoLoad Support BittWare’s IA-220-U2 Accelerates NVMe FLASH SSDs
BittWare customer OVHcloud built a powerful anti-DDoS solution using FPGA technology, specifically the XUP-P3R card.
