
PROVA-C 100G Network Infrastructure Testing Application and Appliance
PROVA-C Appliance Running GENEM-C Software PROVA-C Appliance Runs GENEM-C 100G Network Test Application 4× 100G 1U Appliance Built on BittWare Built on BittWare The PROVA-C
End of Life (EOL) Product Notice:
An end-of-life notice applies to this product. Contact BittWare for more information.
We’ve integrated one of the world’s highest performance servers from HPE with our latest generation of FPGA accelerators to help customers address the most demanding data center applications. The TeraBox™ 2000H is a 2U rack mount server based on the HPE ProLiant DL385 Gen10. It combines two AMD EPYC processors with up to three full-size PCIe BittWare accelerators featuring the latest FPGAs from Achronix, Intel and Xilinx.
For system management, BittWare’s FPGA cards are equipped with a Board Management Controller (BMC), which accepts IPMI 2.0 commands. Use it along with BittWare’s BittWorks II Toolkit to program the FPGA over USB, monitor card power and temperature, and re-program the onboard clocks. You’ll also be able to set points to shut down the card when it gets too hot, access JTAG, or access the software tools remotely.
Choosing a TeraBox FPGA server means knowing you are getting a pre-configured and tested solution. This includes setup and installation of your FPGA cards and associated hardware, your choice of operating system, and development tools. Your TeraBox arrives ready for use—giving your team more time for development and deployment.
The TeraBox 2000H supports many of BittWare’s Achronix, Intel, or Xilinx FPGA-based PCIe cards. The table below lists system totals when populated with four of our certified* cards:
FPGA | Cards in Server | Memory | I/O | Processing | |
S7t-VG6 | Speedster7t | 2 | 4 banks GDDR6 (up to 8 GBytes) | 1x QSFP-DD, 1x QSFP28 6x 100/50/40/25/10 GbE | 692K 6-input lookup tables (LUTs) 375 Mbits embedded RAM |
520N-MX | Stratix 10 MX | 2 | 2 banks DDR4 (up to 256 Gbytes) 2 banks QDRII+ (up to 1152 Mbits) 16 GBytes HBM2 | 4x QSFP28s 4x 100/50/40/25/10 GbE | 2.1 million system logic elements 3,960 DSP blocks |
XUP-VV8 | UltraScale+ VU9P | 2 | 4 banks DDR4 (up to 512 GBytes) 8 banks QDRII+ (up to 2.3 Gbits) | 4x QSFP-DDs 8x 100/50/40/25/10 GbE | 3.8 million system logic cells Up to 12,288 DSP slices |
* Subject to availability. Contact BittWare for additional FPGA card options.
Our technical sales team is ready to provide availability and configuration information, or answer your technical questions.
"*" indicates required fields
PROVA-C Appliance Running GENEM-C Software PROVA-C Appliance Runs GENEM-C 100G Network Test Application 4× 100G 1U Appliance Built on BittWare Built on BittWare The PROVA-C
BittWare On-Demand Webinar High Performance Computing with Next-Generation Intel® Agilex™ FPGAs
BittWare Webinar Arkville PCIe Gen4 Data Mover Using Intel® Agilex™ FPGAs Webinar The Arkville IP from Atomic Rules was recently updated to support Intel Agilex
Article FPGA Neural Networks The inference of neural networks on FPGA devices Introduction The ever-increasing connectivity in the world is generating ever-increasing levels of data.