PROVA-C 100G Network Infrastructure Testing Application and Appliance
PROVA-C Appliance Running GENEM-C Software PROVA-C Appliance Runs GENEM-C 100G Network Test Application 4× 100G 1U Appliance Built on BittWare Built on BittWare The PROVA-C
FPGA Server
TeraBox 1100L
1U Server for FPGA Cards
Front Panel Access to 4x 100GbE and 20x 10GbE, Hosts XUP-P3R FPGA Board
Obsolete Product Notice:
This is an obsolete product and is no longer available for purchase. Contact BittWare for a recommended newer product.
Overview
Looking for a 1U server for your FPGA-accelerated networking applications? BittWare’s TeraBox 1100L is an ideal solution feauring an UltraScale+ FPGA PCIe card connected to an expansion board with 20 SFP+ cages. All QSFPs and SFPs have front panel access, with 4x 100G or 16x 40/25/10G QSFPs plus 20x 10G SFPs in a single rack space!
The host includes BittWare’s XUP-P3R FPGA board, up to a Xeon E5-2600 v4, 64GB (4x DIMMS), and dual redundant 800W power supply.
Key Features
4 QSFPs
and
20 SFPs
1U
Rackmount FPGA server
Xilinx VU9P FPGA
and
Xeon E5-2600
Chassis Key Specs
- 1U, depth 24in (609mm)
- Processor: Xeon E5-2600 v4
- Chipset: Intel C612
- Memory: 4x ECC DDR4 DIMMs
- Slots: 1x PCIe Gen3 x16 with front panel access
- Storage: 4x removable SATA3 6Gb/s
- Power supply: Dual Redundant 800W
BittWare 1U Server
The TeraBox 1100L is a 1U rackmount chassis featuring a BittWare XUP-P3R PCIe card connected to a custom expansion board. The chassis has a custom front panel that allows easy access to the motherboard management interfaces and the GbE ports on the BittWare card and the expansion board. An embedded management system, accessible via command line, allows you to configure, manage, and monitor the expansion board and its interfaces.
Development Support
For system management, BittWare’s FPGA cards are equipped with a Board Management Controller (BMC), which accepts IPMI 2.0 commands. Use it along with BittWare’s BittWorks II Toolkit to program the FPGA over USB, monitor board power and temperature, and re-program the onboard clocks. You’ll also be able to set points to shut down the board when it gets too hot, access JTAG, or access the software tools remotely.
The TeraBox Advantage
Choosing a TeraBox FPGA server means knowing you are getting a pre-configured and tested solution. This includes setup and installation of your FPGA cards and associated hardware, your choice of operating system, and development tools. Your TeraBox arrives ready for use—giving your team more time for development and deployment.
1U rackmount chassis with custom front panel
- 1U rackmount chassis, depth 24 in (609mm)
- 800W dual-redundant power supply platinum
- Supports 1 double-wide Gen3 x16 board (BittWare XUPP3R)
- Storage: 4x SATA 6 Gb/s, Intel RSTe 4.0 RAID
- 6 high-performance fans with fan controller to monitor the temperature of the motherboard CPU, FPGA board, and SEP expansion board
Mini ITX motherboard
- CPU with up to Intel® Xeon® processor E5-2600 v4 product family
- Chipset: Intel C612
- DDR4 DIMMs at up to 2400MT/s; 4 DIMM slots: 4GB/8GB/16GB (up to 64 GBytes)
- I/O: VGA, IPMI LAN, LAN1, LAN2, Dual USB, UID
- Loop heat pipe cooled
BittWare expansion board
- 20 SFP+ cages
- Embedded management interface provides CLI access to the expansion board and its interfaces
- Connected to the XUPP3R via SEP interface
BittWare XUP-P3R PCIe card
- FPGA: Xilinx UltraScale+ VU9P
- PCIe interface: PCIe Gen3 x16
- Memory: 4 DIMMs, each supporting up to 128GBytes DDR4
- I/O: 4 QSFP+ cages supporting 10/25/40/100 GbE
- SEP: Serial expansion port (SEP) connected to the expansion board in the chassis via a ribbon cable.
Interested in Pricing or More Information?
Our technical sales team is ready to provide availability and configuration information, or answer your technical questions.
