Comparing FPGA RTL to HLS C/C++ using a Networking Example
White Paper Comparing FPGA RTL to HLS C/C++ using a Networking Example Overview Most FPGA programmers believe that high-level tools always emit larger bitstreams as
PCIe FPGA Card
250-U2
UltraScale+ on U.2 Form Factor
Fully programmable FPGA processor for NVMe acceleration
Need a Price Quote?
Ready to Buy?
Overview
BittWare’s 250-U2 is a Computational Storage Processor conforming to the U.2 form factor. It features an AMD Kintex UltraScale+ FPGA directly coupled to local DDR4 memory. This energy-efficient, flexible compute node is intended to be deployed within conventional U.2 NVMe storage arrays (approximately 1:8 ratio) allowing FPGA-accelerated instances of:
- Erasure Coding and Deduplication
- Compression, Encryption & Hashing
- String/Image Search and Database Sort/ Join/Filter
- Machine Learning Inference
The 250-U2 can be wholly programmed by customers developing in-house capabilities or delivered as a ready-to-run pre-configured solution featuring Eideticom’s NoLoad® IP. The 250-U2 is front-serviceable in a 1U chassis and can be mixed in with storage units in the same server, allowing users to mix-and-match storage and acceleration.
Key Features
Ideal for U.2 NVMe storage arrays
Up to 16 GBytes DDR4
KU15P Kintex UltraScale+ FPGA: 1.1 million LCs
Block Diagram, Data Sheet and Specifications
Want More Details?
Request the Hardware Reference Guide (HRG)
The HRG gives you much more detail about the card such as block diagrams, tables and descriptions.
Specifications
FPGA
- AMD Kintex UltraScale+
- KU15P in an FFVA1156 package
- Core speed grade - 2
- Contact BittWare for KU11P FPGA option
On-board DDR4 SDRAM
- One bank of DDR4 SDRAM x 72 bits
- 8GB bank (16GB version also available)
- Transfer Rate: 2400 MT/s
Host interface
- U.2 Connector
- Compliant to SFF-8639
Datacenter deployment
- On-board NVMe compliant SMBUs controller (Spec. 1.0a)
- Field flash update via software or SMBus
- SMBus FPGA flash control: anti-bricking, fallback, and multiboot
- SMBus access to unique board data and temperature sensor
Back panel features
- User LEDs accessible
- Reset switch to restore factory settings
Development features (behind back panel)
- JTAG connector for access to the FPGA, flash, and debug tools
- GPIO connector
- MicroSD connector
Power supply monitoring & reporting
- Voltage monitoring
- Temperature monitoring
- Fault condition reporting to FPGA
Cooling
- U.2 drive case optimized for cooling with passive heatsink
Electrical
- Hot swapping tolerant
- On-card power derived from U.2 supplies
- Power dissipation is application dependent
- Typical FPGA power consumption ~20W
- Card designed to deliver up to 25W power consumption
Environmental
- Operating temperature: 5°C to 35°C
- Cooling: air convection
Form factor
- U.2 compliant 2.5” Drive Form Factor
- Height: 15mm
Development Tools
FPGA development
- BIST - Built-In Self-Test for CentOS 7 provided with source code (pinout, gateware, PCIe driver and host test application)
Application development
- AMD Tools - Vivado Design Suite HLx Editions: HDL and C/C++ with HLS
Deliverables
- 250-U2 FPGA board
- Built-In Self-Test (BIST)
- Eideticom NoLoad pre-installed (optional)
- 1-year access to online Developer Site
- 1-year hardware warranty
- Contact BittWare for extended warranty and support options
r4 v0
Order Your Cards in a TeraBox™ FPGA Server
Get extended warranty support and save time with a pre-integrated solution!
Ready to Buy?
Product availability for online ordering from Mouser Electronics:
Stock was checked 9 minutes ago. Stock is usually checked every 15 minutes.
Interested in Pricing or More Information?
Our technical sales team is ready to provide availability and configuration information, or answer your technical questions.
