IA-440i

400G + PCIe Gen5 Single-Width Card

IA-440i PCIe card

Compact 400G Card with the Power of Agilex

The Intel Agilex 7 I-Series FPGAs are optimized for applications that are bandwidth intensive and require high performance processor interfaces.

  • 2nd-Generation HyperFlex Architecture: Up to 40 percent higher performance or up to 40 percent lower total power compared with Stratix 10 FPGAs.
  • 400G: Configurable networking support for the most demanding bandwidth requirements.
  • PCIe Gen5 and CXL Support: Data transfer speeds 2x faster than Gen4, and high-speed interface between CPUs and workload accelerators.

Agilex Acceleration Video

400G Networking

IA-440i provides up to 400G to support the most demanding bandwidth requirements. Configurable networking support includes hard Ethernet media access control (MAC), physical coding sublayer (PCS), and forward error correction (FEC) for a range of speeds.

2nd Gen Intel® Hyperflex™ Architecture

Continuous improvements to Intel Hyperflex deliver improved performance compared to Stratix 10 device designs. The 2nd Gen architecture thus greatly improve the productivity of customers and reduce time-to-market.

PCIe Gen5 and CXL

PCIe Gen5 supports data transfer speeds 2x higher than PCIe Gen4, providing greater performance capabilities to developers of PC interconnect, graphics adapters, and chip-level communications. And Compute Express Link (CXL) support enables high-speed, low-latency interface to CPUs.

Need a Price Quote?

PCI Express logo

Generation 5.0

Double the Bandwidth!

Built with the latest PCIe Gen5 interface, the IA-440i can transfer up to twice the bandwidth of Gen4 devices.

Enterprise-class for Deployment

Ramp to product with the power of Molex

The IA-440i is built on BittWare’s enterprise-class foundation stones: existing products and processes that are already proven through extensive validation. When it’s time to ramp to production, this means a faster turnaround and utilizing the same hardware you have been using for development.

BittWare enterprise class categories illustration
CXL logo

Supporting CXL

CXL (Compute Express Link) is an industry-supported cache-coherent interconnect between processors, memory expansion, and accelerators. CXL technology maintains memory coherency between the CPU memory space and memory on attached devices, which allows resource sharing with lower latency, reduced software stack complexity, and lower overall system cost. 

* CXL requires licensing that is sold separately from the card

IA-440i Block Diagram, Data Sheet and Specifications

To access USB and/or JTAG, you need accessory cables. Choose from these options:

  • USB-only breakout cable: Pico-lock to USB A cable, BittWare part number RS-PL12-UAP-83.
  • JTAG-only breakout cable: Pico-lock to JTAG cable, BittWare part number RS-PL12-JTB-13
  • USB + JTAG breakout card:  BittWare part number ACC-IA-JTUSB-BKO

We recommend the combination USB + JTAG breakout card for development. For deployment, the USB-only breakout cable is recommended.

These accessory cables are sold separately.

Want More Details?

Request the Hardware Reference Guide (HRG)

The HRG gives you much more detail about the card such as block diagrams, tables and descriptions.

Board Specifications

FPGA

  • Intel Agilex 7 AGI023
    • AGI023: Core speed grade -1: XCVR speed grade -1
    • XCVR speed grade -1 supports CXL (CXL IP is licensed and purchased separately)
    • FPGA includes ARM HPS

On-Board flash

  • 2Gbit Flash memory for booting FPGA

External memory

  • 2x banks on-board DDR4, 8GB each

Host interface

  • x16 Gen5 interface direct to FPGA, connected to PCIe hard IP
  • CXL support (CXL IP is licensed and purchased separately)

QSFP-DD cage

  • 400 Gbps (8x 50Gbps PAM4)
  • PAM4: 1x 400GbE, 2x 200GbE, 4x 100GbE, 8x 50GbE
  • NRZ: 1x 200GbE, 2x 100GbE, 4x 50GbE, 8x 10/25 GbE
  • Multi-rate hard MAC supports all combinations
  • Jitter cleaner for network recovered clocking

External clocking

  • 1 PPS and 10MHz ref clk inputs (in-board)

USB

  • USB access to BMC, USB-UART

Board Management Controller

  • Power sequencing and reset
  • Voltage, current, temperature monitoring
    • Protection shut-down
  • Clock configuration
  • Low bandwidth BMC-FPGA comms with SPI link
  • USB 2.0
  • PLDM support
  • Card-level security
    • BMC Root of Trust
    • BMC and FPGA secure boot
    • BMC and FPGA secure upgrade
    • Key management

Cooling

  • Standard: single-width passive heatsink

Electrical

  • On-board power derived from PCIe slot
  • Power dissipation is application dependent
  • Max power consumption 75W

Environmental

  • Operating temperature: 5°C to 35°C

Quality

  • Manufactured to IPC-A-610 Class 2
  • RoHS compliant
  • CE, FCC, UKCA & ICES approvals

Form factor

  • Low profile (half-height, half-length) PCIe slot card
  • Size: 68.90mm x 167.65mm (2.713in x 6.600in)

Development Tools

System development

  • BittWare SDK including PCIe driver, libraries, and board monitoring utilities

Application development

  • Supported design flows - Quartus Prime Pro (HDL, Verilog, VHDL, etc.)

r1 v0

oneAPI logo

Looking for oneAPI support? Contact BittWare for details.

Order Your Cards in a TeraBox™ FPGA Server

Get extended warranty support and save time with a pre-integrated solution!

TeraBox 1000S server photo
TeraBox 1401B server photo
TeraBox 2000D server photo
TeraBox 4000S server photo

Interested in Pricing or More Information?

Our technical sales team is ready to provide availability and configuration information, or answer your technical questions.