The TeraBox 4000S is a 4U FPGA server based on the SuperMicro 4029GP-TRT chassis. This server offers two Intel Xeon Scalable CPUs along with high PCIe slot density. With configurations of up to 8 of BittWare’s large double-width cards, this server is an excellent premium option for the 4U form factor.
For system management, BittWare’s FPGA cards are equipped with a Board Management Controller (BMC), which accepts IPMI 2.0 commands. Use it along with BittWare’s BittWorks II Toolkit to program the FPGA over USB, monitor card power and temperature, and re-program the onboard clocks. You’ll also be able to set points to shut down the card when it gets too hot, access JTAG, or access the software tools remotely.
Choosing a TeraBox FPGA server means knowing you are getting a pre-configured and tested solution. This includes setup and installation of your FPGA cards and associated hardware, your choice of operating system, and development tools. Your TeraBox arrives ready for use—giving your team more time for development and deployment.
The TeraBox 4000S supports many of BittWare’s Achronix, Intel, or Xilinx FPGA-based PCIe cards. The table below lists system totals when populated with eight cards*:
|FPGA||Cards in Server||Memory||I/O||Processing|
|S7t-VG6||Speedster7t||8||64 banks GDDR6 (up to 64 GBytes)||3.6 Terabit/sec
48x 100/50/40/25/10 GbE
|5.5 million 6-input lookup tables (LUTs)
1.5 Gbits embedded RAM
|520N-MX||Stratix 10 MX||8||16 banks DDR4 (up to 2 Terabytes)
32 banks QDRII+ (up to 4.6 Gbits)
32x 100/50/40/25/10 GbE
|16.8 million system logic elements
128 GBytes HBM2
|XUP-VV8||UltraScale+ VU13P||8||32 banks DDR4 (up to 4 Terabytes)
64 banks QDRII+ (up to 18.4 Gbits)
64x 100/50/40/25/10 GbE
|30.4 million system logic cells
Up to 98,304 DSP slices
* Contact BittWare for additional FPGA card options.