The TeraBox 1000S supports a single- or dual-width BittWare PCIe FPGA card. Choose from a variety of cards based on Achronix Speedster 7t, Intel Stratix 10/Arria 10, or Xilinx UltraScale+ FPGAs.
Card specs vary depending on the FPGA card you select. For example, some cards support up to 512 GBytes of DDR4. Our latest UltraScale+ cards feature QSFP-DDs, which you can use with a breakout cable for up to 8x 100Gb interfaces.
For system management, BittWare’s FPGA cards are equipped with a Board Management Controller (BMC), which accepts IPMI 2.0 commands. Use it along with BittWare’s BittWorks II Toolkit to program the FPGA over USB, monitor card power and temperature, and re-program the onboard clocks. You’ll also be able to set points to shut down the card when it gets too hot, access JTAG, or access the software tools remotely.
Choosing a TeraBox FPGA server means knowing you are getting a pre-configured and tested solution. This includes setup and installation of your FPGA cards and associated hardware, your choice of operating system, and development tools. Your TeraBox arrives ready for use—giving your team more time for development and deployment.
The TeraBox 1000S supports many of BittWare’s Achronix, Intel, or Xilinx FPGA-based PCIe cards. The table below lists system totals when populated with a double-wide card*:
|FPGA||Cards in Server||Memory||I/O||Processing|
|S7t-VG6||Speedster7t||1||8 banks GDDR6 (up to 192 GBytes)||600 Gbits/sec
6x 100/50/40/25/10 GbE
|692K 6-input lookup tables (LUTs)
189 Mb embedded RAM
|520N-MX||Stratix 10 MX||1||2 banks DDR4 (up to 256 GBytes)
4 banks QDRII+ (up to 1152 Mbits)
4x 100/50/40/25/10 GbE
|2.1 million system logic elements
16 GBytes HBM2
|XUP-VV8||UltraScale+ VU13P||1||4 banks DDR4 (up to 512 GBytes)
8 banks QDRII+ (up to 2.3 Gbits)
8x 100/50/40/25/10 GbE
|3.8 million system logic cells
Up to 12,288 DSP slices
* Contact BittWare for additional FPGA card options.