For system management, BittWare’s FPGA cards are equipped with a Board Management Controller (BMC), which accepts IPMI 2.0 commands. Use it along with BittWare’s BittWorks II Toolkit to program the FPGA over USB, monitor card power and temperature, and re-program the onboard clocks. You’ll also be able to set points to shut down the card when it gets too hot, access JTAG, or access the software tools remotely.
Choosing a TeraBox FPGA server means knowing you are getting a pre-configured and tested solution. This includes setup and installation of your FPGA cards and associated hardware, your choice of operating system, and development tools. Your TeraBox arrives ready for use—giving your team more time for development and deployment.
The TeraBox 2000H supports many of BittWare’s Achronix, Intel or Xilinx FPGA-based PCIe cards. The table below lists specifications for some of our certified cards*:
|FPGA||Cards in Server||Memory||I/O||Processing|
|S7t-VG6||Speedster7t||2||4 banks GDDR6 (up to 8 GBytes)||1x QSFP-DD, 1x QSFP28
6x 100/50/40/25/10 GbE
|692K 6-input lookup tables (LUTs)
375 Mbits embedded RAM
|520N-MX||Stratix 10 MX||2||2 banks DDR4 (up to 256 Gbytes)
2 banks QDRII+ (up to 1152 Mbits)
16 GBytes HBM2
4x 100/50/40/25/10 GbE
|2.1 million system logic elements
3,960 DSP blocks
|XUP-VV8||UltraScale+ VU13P||2||4 banks DDR4 (up to 512 GBytes)
8 banks QDRII+ (up to 2.3 Gbits)
8x 100/50/40/25/10 GbE
|3.8 million system logic cells
Up to 12,288 DSP slices
* Other certified cards available. Additional expansion capabilities are also available via M.2 and U.2. Contact BittWare for details.