Customers can purchase the TeraBox 200DE with FPGA accelerators pre-integrated directly from Dell Technologies via the Dell OEM program. The system includes Dell certification – a single comprehensive warranty covers server and BittWare FPGA accelerator cards. Dell can supply and support custom configurations.
For system management, BittWare’s FPGA cards are equipped with a Board Management Controller (BMC), which accepts IPMI 2.0 commands. Use it along with BittWare’s BittWorks II Toolkit to program the FPGA over USB, monitor card power and temperature, and re-program the onboard clocks. You’ll also be able to set points to shut down the card when it gets too hot, access JTAG, or access the software tools remotely.
Choosing a TeraBox FPGA server means knowing you are getting a pre-configured and tested solution. This includes setup and installation of your FPGA cards and associated hardware, your choice of operating system, and development tools. Your TeraBox arrives ready for use—giving your team more time for development and deployment.
The TeraBox 200DE supports many of BittWare’s Achronix, Intel or Xilinx FPGA-based PCIe cards. The table below lists specifications for some of our certified cards*:
FPGA | Cards in Server | Memory | I/O | Processing | |
S7t-VG6 | Speedster7t | 2 | 4 banks GDDR6 (up to 8 GBytes) | 450 Gbits/sec 6x 100/50/40/25/10 GbE |
692K 6-input lookup tables (LUTs) 375 Mbits embedded RAM |
520N-MX | Stratix 10 MX | 2 | 2 banks DDR4 (up to 256 Gbytes) 2 banks QDRII+ (up to 1152 Mbits) 16 GBytes HBM2 |
250 Gbits/sec 4x 100/50/40/25/10 GbE |
2.1 million system logic elements 3,960 DSP blocks |
XUP-P3R | UltraScale+ VU9P | 2 | 4 banks DDR4 (up to 512 Gbytes) 4 banks QDRII+ (up to 2304 Mbits) |
250 Gbits/sec 4x 100/50/40/25/10 GbE Clock output, 1PPS output, trigger input/output |
2.5 million system logic cells Up to 6,840 DSP slices |
* Other certified cards available. Additional expansion capabilities are also available via M.2, U.2, and ESDFF. Contact BittWare for details.